Product manual

Galaxy G3G12 / G3G16 - Installation and Hardware Reference Manual
186 Section 5 Management with CLU
Mapping a LUN to an Initiator
You must add an initiator to the Galaxy3G’s initiator list in order to use the initiator to create a LUN. You can
add initiators under Fibre Channel Management see Adding a Fibre Channel Initiator, under SAS
Management, see Adding a SAS Initiator or Creating an Initiator.
To map a LUN to an initiator:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight an existing Initiator and press Enter.
• A list of logical drives displays.
4. In the LUN field, press the backspace key to erase the current value, then type the LUN you want
to assign to this initiator, from 0 to 255.
• If you make a error, press Ctrl-R to restore the current LUN.
5. Press Ctrl-A to save the LUN map.
Deleting an Initiator
To delete an initiator:
1. From the Main Menu, highlight Additional Info and Management and press Enter.
2. Highlight LUN Mapping and press Enter.
3. Highlight the initiator you want to delete and press the spacebar to mark it. The mark is an asterisk
(*) to the left of the listing.
4. Highlight Delete Marked Initiators and press Enter.
5. Press Y to confirm the deletion.