Product manual

Galaxy G3G12 / G3G16 - Installation and Hardware Reference Manual

199 Section 5 Management with CLU

5.22 Restarting the S

• Restarting Galaxy3G – Serial Connection

Restarting Galaxy3G – Telnet Connection

This function enables you to restart the Galaxy3G subsystem on a Telnet connection. You can only do part

of this procedure in the CLU. Additional action is required, as described below. To restart the Galaxy3G:

1. From the Main Menu, highlight Additional Info and Management and press Enter.

2. Highlight Shutdown or Restart and press Enter.

3. Highlight Option and press the spacebar to display Restart.

4. Highlight Submit and press Enter.

A warning message appears.

5. Press Y to continue.

The screen will go blank.

6. Wait for no less than two minutes.

7. Re-establish your Telnet connection to the Galaxy3G CLU.

If you cannot re-establish a connection, wait 30 seconds, then try again.

Restarting Galaxy3G – Serial Connection

This function enables you to restart the Galaxy3G subsystem on a serial connection. You can only do part of

this procedure in the CLU. Additional action is required, as described below. To restart the Galaxy3G: