Product manual

Galaxy G3G12 / G3G16 - Installation and Hardware Reference Manual
206 Section 6 Maintenance
6.3 Replacing a Power Supply
The power supply and its fans are replaced as one unit. There are no individually serviceable parts. No tools
are required for this procedure.
Remove the Old Power Supply
To remove the power supply:
1. Verify that the power supply LED is amber or red.
2. Switch off the power.
3. Unplug the power cord.
4. Press the release button and pull the handle downward as shown. See
5. Pull the power supply out of the Galaxy3G enclosure.
Install a New Power Supply
To install the power supply:
1. Carefully slide the power supply into the enclosure.
2. Gently press the handle in and upward until it locks. See
3. Plug in the power cord.
4. Switch on the power supply.
5. Verify that the new power supply LED is green.
This completes the power supply replacement procedure
Fig 6.3a Replacing G3G Power Supply