Product manual

Galaxy G3G12 / G3G16 - Installation and Hardware Reference Manual
210 Section 6 Maintenance
5. Remove the two screws holding the battery assembly in place.
6. Detach the connector on the circuit board.
Do not detach any other connectors.
7. Lift the battery assembly out of the cooling unit.
8. Place a new battery assembly into the cooling unit.
9. Attach the connector on the circuit board.
10. Install the two screws holding the battery assembly in place to the cooling unit.
11. Place the top section of the cooling unit onto the bottom section and tighten the thumbscrews.
12. Carefully slide the cooling unit into the enclosure.
13. Gently press the handle in and upward until it locks.
This completes the battery replacement procedure.
Remove this screw
Remove this screwDetach this connector
Fig 6.5c Disassembly of cache battery
Fig 6.5d Replacing the cooling unit