Product manual

Galaxy G3G12 / G3G16 Installation and Hardware Reference Manual
53 Section 2 Installation / Connectivity
When boot-up is finished and the G3G is functioning normally:
• Controller Heartbeat LED blinks green once per second for five seconds,
goes dark for ten seconds, then blinks green once per second for five
seconds again.
• Power, FRU and Logical Drive LEDs display green continuously.
• Controller LEDs flash green if there is activity on that controller.
Drive Carrier Indicators fig 2.4.4.1a
There are two LEDs on each disk drive carrier. They report the presence of power and a
disk drive, and the current condition of the drive.
After a few moments the Power/Activity LED should display Green. If there is no disk drive in the carrier, the
Power/Activity LED will remain dark.
The Power/Activity LED flashes during drive activity.
The Disk Status LED displays Green when a drive is present and configured.
Fig 2.4.4.1a G3G Drive Carrier Indicators