Product manual

Galaxy G3G12 / G3G16 Installation and Hardware Reference Manual
68 Section 4 Maintenance with GAM
Section 4
Management with GAM
4.0 Management with GAM
This chapter covers the following topics:
• 4.1 Logging into GAM
• 4.2 Selecting a Language
• 4.3 Perusing the Interface
• 4.4 Logging out of GAM
• 4.5 Working with the Storage
Network
• 4.6 Working with Subsystems
• 4.7 Managing Users
• 4.8 Managing the Network
Connection
• 4.9 Managing Fibre Channel
Connections
• 4.10 Managing SAS Connections
• 4.11 Managing Storage Services
• 4.12 Managing Software Services
• 4.13 Exporting the User Database
• 4.14 Importing a User Database
• 4.15 Updating the Firmware
• 4.16 Restoring Factory Defaults
• 4.17 Clearing Statistics
• 4.18 Shutting Down the
Subsystem
• 4.19 Restarting the Subsystem
• 4.20 Managing Controllers
• 4.21 Managing Enclosures
• 4.22 Managing Physical Drives
• 4.23 Managing Disk Arrays
• 4.24 Managing Logical Drives
• 4.25 Managing Spare Drives
• 4.26 Working with the Logical
Drive Summary
4.1 Logging into GAM fig 4.1a
In order to log into GAM, you must first setup a network connection between your Host PC and the
Galaxy3G subsystem, as described in “Chapter 3: Galaxy3G Setup”.
To log into GAM:
1. Launch your Browser.
2. In the Browser address field, type in the IP address of the Galaxy3G Management port.
Note that the IIP address shown below is only an example. The IP address you type into your browser
will be different.
Regular Connection
• GAM uses an HTTP connection.............................................. .http://
• Enter the Galaxy3G’s Management Port IP address.. 192.168.1.129
Together, your entry looks like this:
http://192.168.1.129
Secure Connection
• GAM uses a secure HTTP connection .................................. .https://
• Enter the Galaxy3G’s Management Port IP address.. 192.168.1.129
Together, your entry looks like this: