Technical information

GALAXY® AUROURA LS CONFIGURATION AND SYSTEM INTEGRATION GUIDE
38 Section 2 Basic Setup
2.2.5 Apple OSX Client RAID Connections and LUN Preparation
Refer to the Fibre channel HBA installation instructions to install your HBA and drivers into
your Apple OSX clients. This document also uses OS/X 10.5 as an example – all versions of
OS/X supported by the Fibre Channel host adapter should work and have almost identical
setup procedures (From 10.2 to 10.6, except where noted). Once you have installed your host
adapter, connected the fibre cable, and rebooted, you may see the following popup window. If
you get this warning, it will save all of the steps necessary in setting up the Aurora LS with
Apple Disk Utility. So if the Disk Insertion warning does appear, click on the Initialize…
button:
Initializing the Aurora LS is the purpose of this procedure so iIf this popup did not come up, or
if you closed it by accident, or if it closed by itself, or if you want to know how to get into the
Apple Disk Utility and setup the initialize manually, follow these steps:
On your desktop, you will see an icon
(usually in the upper-right corner of the
screen), which represents your boot drive. Double-click this icon to open your boot drive.
The Finder will open . If you have not seen or used the finder before, contact Tech Support for
assistance. Click on Applications
, which is near the top of the list: