Technical information

GALAXY® AUROURA LS CONFIGURATION AND SYSTEM INTEGRATION GUIDE
46 Section 3 Management
Main GUI Screen:
On the upper left is a link called Module Config - this is used to enable or disable the ability to
change settings on the other screens which allow changes. The Aurora LS’s main GUI
"NumaRAID GUI Main Page,” version number for the GUI (In this case 1.2.10). Below these
are a series of three tables.
The first table shows the RAID Status. A RAID is a set of slots or disks, set to act in
conjunction as one larger device. A RAID does not necessarily need to contain all of the disks
in the array. Because of this, there are three possible things you could see in this table: If no
RAID(s) are defined, it will say "No Raids defined", followed by the option to create a RAID. If
RAID(s) are defined, but drives are still available, you will see a list of the RAID(s), with Details
buttons next to each of them, followed by the option to create a RAID. If all of the drives are
used in RAID(s) (as in the example above), you will see the list of RAID(s), but will not be
given the option to create any new RAID(s)..
Click on Module Config – On the top of the Main GUI screen.
Click the yes buttons and click save. Return to the Main Screen which now displays the
information about the RAID.