Technical information

GALAXY® AUROURA LS CONFIGURATION AND SYSTEM INTEGRATION GUIDE
53 Section 3 Management
3.1.5 LUN Details
The LUN Details screen allows you to manage the LUN, as well as run a surface scan on a
single LUN. These are very powerful features currently not found on other arrays.
The top table shows LUN Details, similar to how LUN Details is shown on the RAID screen,
however there is a Delete
function. If you want to delete the LUN (Note all initiators and
targets must be removed first), left-click on the Delete
button. In this table, we see the the
name of the LUN (MyLun), the name of the RAID that it is part of, the size of the LUN (in
Gigabytes), and offset (Also in Gigabytes).
Below the LUN details table, is a table where you can run a surface scan of a LUN. There is
no separate screen for this – the results are shown on the RAID surface scan screen.
 CAUTION: A write scan will erase data on the LUN.
The controls and reports are the same as the RAID Surface scan - see the previous section
for instructions.