User`s manual

BIOS SETUP
44 MB770 User’s Manual
Power Management Setup
The Power Management Setup allows you to save energy of your system
effectively.
Phoenix - Award WorkstationBIOS CMOS Setup Utility
Power Management Setup
ACPI Function
Enabled ITEM HELP
ACPI Suspend Type
S1 (POS) Menu Level
Power Management Option
User Define
HDD Power Down
Disabled
Suspend Mode
Disabled
Video Off Option
Suspend -> Off
Video Off Method
V/H SYNC+Blank
Modem Use IRQ
3
Soft-Off by PWR-BTTN
Instant-Off
Run VGA BIOS if S3 Resume
Auto
Ac Loss Auto Restart
Off
IRQ/Event Activity Detect
Press Enter
ACPI Function
Enable this function to support ACPI (Advance Configuration and
Power Interface).
Power Management Option
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving Minimum power management
Max. Power Saving Maximum power management.
User Define Each of the ranges is from 1 min. to
1hr. Except for HDD Power Down
which ranges from 1 min. to 15 min.
HDD Power Down
When enabled, and after the set time of system inactivity, the hard disk
drive will be powered down while all other devices remain active.
Suspend Mode
BIOS will turn the HDD's motor off when system is in SUSPEND mode.
By default, this field is disabled.
Video Off Option
This field sets the video off option. By default, video goes into suspend
state and then Off.