Operating instructions

PAGE 14 www.rosco.com DO’S AND DON’TS
DO'S & DON'TS
DO Read the entire manual before operating the machine and pay particular
attention to all CAUTIONS AND WARNINGS.
DO Use ONLY Rosco brand fog fluids.
DO Use an extension cord which is properly rated for voltage, current and length
and which is free from nicks or other signs of wear.
DO Before each operating period, check to see that the machine is clean and free of
foreign objects.
DO Test first for dry fog.Turn the FOG switch on. Place a piece of cardboard or
paper 18 inches (50 cm) in front of the machine. If the surface is at all wet
return the machine to your dealer for servicing.
DO Ensure that the machine is adequately ventilated.
DO Use proper caution when handling hot surfaces
DO Use the minimum amount of fog required to achieve the desired effect.
DO NOT Use the machine near a person who has asthma or similar inhalation disorder.
DO NOT Use any foreign substances in the machine.
DO NOT Use a machine that is damaged or operating improperly in any way.
DO NOT Use a machine that leaks fluid from the housing.
DO NOT Leave the machine switched on for prolonged periods without producing fog.
DO NOT Enclose the machine.
DO NOT Install the machine in such a fashion that the operator cannot see the whole
machine including indicator lights.
DO NOT Touch the shielded nozzle of the machine. Allow sufficient cooling time after
operation before attempting to perform maintenance.
DO NOT Direct the fog continuously against the same spot. This may eventually cause
fluid to recondense on walls, furniture, sets, etc.
READ THE COMPLETE MANUAL TO INSURE SAFE OPERATION.