Operating instructions

PAGE 7 www.rosco.com DIGITAL/DMX INSTRUCTIONS
DIGITAL/DMX REMOTE CONTROL
OPERATING INSTRUCTIONS
OVERVIEW
The DIGITAL/DMX REMOTE CONTROL is a sophisticated digital interface that allows the
the Delta 6000 to be operated: manually (MANUAL MODE); from timers (TIMER MODE);
from DMX control (DMX MODE); or from a 0-10 volt signal. The interface is a backlit
liquid crystal display (LCD) showing a series of commands. The interface allows the menu to
display in any of six languages (English, French, Spanish, Italian, Portuguese, and German).
In addition, it allows timers to be set in one second increments up to 10 minutes on and one
hour off and has an easy interface to set the DMX channel. It also gives error messages that
indicate when the reservoir is running low on fluid or when there is no DMX signal. To view
the menu structure, see the MENU FLOWCHART on page 18.
7. INITIAL OPERATION
Follow steps 1-4 above. When first powered the DIGITAL/DMX REMOTE will display a
scrolling “ROSCO DELTA 3000 FOG MACHINE” message and then display the
Operation Menu. The Operation Menu is the primary interface for operating the Delta 6000.
While in the Operation Menu, the LCD will give a “HEATING” message. Note: The
DIGITAL/DMX REMOTE will indicate when the fluid container is low on fluid with an
alternating message “LOW FLUID LEVEL” in the Operation Menu.
8. LANGUAGE DISPLAY
The DIGITAL/DMX REMOTE CONTROL is unique in that it can display the menu
commands in any of six languages: English, French, Spanish, Portuguese, Italian, and
German. To access the Language Menu: While in the Operation Menu, push the ENTER
POWER
button
TIMER
button
LCD
display
ARROW
b
uttons
Jog
wheel
Fog RUN
b
utton
Fog MOMENTARY
button
ENTER
b
utton
DIGITAL/DMX REMOTE CONTROL