ND100 User Guide ND100 USER GUIDE By : 1 Rosco Vision Systems : ND100
ND100 User Guide Index Contents About Product ................................................................................................................................... 3 Interfaces .................................................................................................................................. 3 Power on the ND100: ........................................................................................................ 4 Configure ND100 ..........................................
ND100 User Guide About Product ND100 is a Mini Router is a CAT-4 device which can support high download and upload throughput as per the 3GPP standards with following features : ◼ Supports FDD-LTE on band ◼ Supports WCDMA on band ◼ Supports WIFI 802.11b/g/n on 2.4GHz & 802.11ac on 5GHz with Internal Antennas.
ND100 User Guide Let’s start using ND100 1. Insert SIM card with 3FF (MICRO SIM) into SIM slot section. 2. Connect both antennas provided with packaging. Power on the ND100: ⚫ ND100 can be power on using USB, Just connect USB to your PC. OR Using 4 PIN Molex connector for Power Supply (Ref. Interface section). Kindly use the adaptor & cables provided with packaging.
ND100 ⚫ User Guide Device support webGUI management. Which means it can be setup using any web browser which makes this device so easy to configure Once your PC recognized this device , you can open any web browser Input http://192.168.0.1 on address bar and hit enter. User will get login window for ND100 as below ⚫ ⚫ ⚫ User needs to enter admin/admin for Username/Password. NOTE: ➢ Default password is admin but it can be modify.
ND100 User Guide Manage WIFI User ⚫ On Connected Devices page, User can see all the connected devices details like IP & MAC address and if required, user can block any unwanted or suspicious connected device by simply click on Block tab. All the blocked devices can be seen under Blocked devices. Where user can also unblock them if required.
ND100 User Guide Settings ⚫ On this section, User can see different important configuration settings like: WIFI Setting Device Settings Mobile Network Remote Update (Firmware over the Air feature) WIFI Settings ➢ On this page, User can configure the WIFI feature like SSID, Security , Password, Transmission mode & channel etc. ( ref.
ND100 User Guide WiFi Name (SSID): Subscriber set identity; User can define this field as per their requirement. Default SSID is “default_XXXXXX“(last six characters for WIFI MAC address) Security: available options are None ( as Default), WAP2 Personal (AES) & WPA/WPA2 Mixed Mode WIFI Password (Key): User can setup password 8~ 63 ASCII characters for password. By Default , There is no password. 802.11 Mode: Supports 802.11 bgn (as default) & 802.11ac.
ND100 User Guide New page will open and then user needs to put current admin password and then only User can define new password , ref below image To make change into effect, user must need to click on Save Changes tab. Backup and Restore: On this section, User can get many important features like backup/Restore, Reboot/Reset.
ND100 User Guide ⚫ To backup the current configuration, User needs to input admin password and then click on Download tab to the PC connected to device. (ref.
ND100 User Guide PC and click on Restore Now tab to get saved configuration over ND100. (ref. below image) Reset to Factory Defaults & Reboot: ⚫ User needs to click on Restore Factory Defaults tab to make all the configurations as factory settings. This is important feature sometimes useful during debugging where you want have factory settings on device. When Restore factory default tab is clicked , User can the below message on webpage for confirm . To continue , confirm tab needs to be clicked.
ND100 User Guide factory settings process is going on. So ensure , no power failuer while doing this.It may cause problem to device. ⚫ In case, where Restart/Reboot is requyired for the device. User can select the Restart tab. User can get below message on Prompted window to confirm. Once confirn, below message on webpage appears to show about restart procedure & User needs to ensure unitterupted power supply to device while doing this.
ND100 User Guide Mobile Network Under this setting page, User will have ability to configure cellular and SIM related configurations. Mobile Settings: User can turn off/On the cellular data by sliding On/Off tab. Under advance setting, User can define the APN manually. ( ref. below image ) SIM Lock: on this page, User can see the SIM status, PIN Lock status. User can also enable the SIM PIN lock. ( ref.
ND100 User Guide FOTA URL Link: This page is for about FOTA feature, User needs to modify/Input URL for FOTA server to get SW upgrade remotely. Advance Settings On this section, user can find some important industrial and useful features related to VPN, MAC Filter, LAN setting, Port filtering and forwarding .
ND100 MAC filter User Guide This feature is disabled (OFF) as default. If User wants to allow specific MAC address only, then user need to click on new device and input the allowed MAC address and click on Save Changes tab to takes affect. LAN On this page, User can configure the local area network (LAN) as per the requirements for below optiions available on webGUI . Local IPv4 : 192.168.0.1 (as default) Subnet mask: 255.255.255.
ND100 User Guide Port Filtering On this page, User can configure application to access the internet as required.
ND100 User Guide Port Forwarding On this page, User can define the specific incoming traffic to specific connected device/IP address. This feature is OFF (disbaled) by Default.
ND100 User Guide Logout webGUI In case if user wants to log out from the webGUI, User needs to click on SIGN OUT option available on Top corner of webGUI page. Webpage will be redirected to login page. Discontinue transmission In case if absence of information or operational failure, the device will automatically discontinue transmission by software control.
ND100 User Guide FCC statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment.
ND100 User Guide 5G Wi-Fi Restriction information The device for operation in the band 5150–5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
