User's Guide

ND100 User Guide

Rosco Vision Systems : ND100

Let’s start using ND100

1. Insert SIM card with 3FF (MICRO SIM) into SIM slot section.

2. Connect both antennas provided with packaging.

Power on the ND100:

⚫ ND100 can be power on using USB, Just connect USB to your PC.

Using 4 PIN Molex connector for Power Supply (Ref. Interface section). Kindly use the

adaptor & cables provided with packaging.

⚫ Power Led will be turned out Green, which indicates that device is powered on

successfully and it is ready to use or setup the device configurations if required.

Configure ND100

⚫ Turn ON the device and connect LAN port with your PC .