User's Guide

ND100 User Guide
5
Rosco Vision Systems : ND100
⚫ Device support webGUI management. Which means it can be setup using any web
browser which makes this device so easy to configure
⚫ Once your PC recognized this device , you can open any web browser
⚫ Input http://192.168.0.1 on address bar and hit enter.
⚫ User will get login window for ND100 as below
User needs to enter admin/admin for Username/Password.
NOTE:
➢ Default password is admin but it can be modify.
➢ After press reset switch or select factory default function from webGUI,
Password will be again as default (admin) with all the default configurations.
⚫ After input correct credentials, click on Sign In tab.
User can login to web management page.
Homepage
⚫ After log-in , User can see homepage where all the basic details about ND100 are displayed
like:
IMEI
Firmware & Hardware version
SIM card ICCID
Network Status and Signals information
WIFI Status with SSID, Password and connected users
Internet status with available WAN IP, connected time and data usage.