User's Guide

ND100 User Guide
8
Rosco Vision Systems : ND100
WiFi Name (SSID): Subscriber set identity; User can define this field as per their requirement.
Default SSID is “default_XXXXXX“(last six characters for WIFI MAC address)
Security: available options are None ( as Default), WAP2 Personal (AES) & WPA/WPA2 Mixed
Mode
WIFI Password (Key): User can setup password 8~ 63 ASCII characters for password. By Default ,
There is no password.
802.11 Mode: Supports 802.11 bgn (as default) & 802.11ac.
Channel: Supports Automatic channel (as default) and manual channel from 1 ~ 9 for
802.11bgn
Supports Automatic channel (as default) and manual channel from
36, 40, 44, 48, 149, 153, 157, 161& 165 for 802.11ac.
Broadcast Wi-Fi Name (SSID): Enabled as default. If disabled, SSID name will not be visible during
WIFI AP scan.
Wi-Fi Privacy Separation: Enabled as default, User can uncheck it wants to disable this security
function.
Max WIFI connections: Default is 8, user can defined the number of devices (1~8) which can
connect to ND100 over WIFI
NOTE: After change any configuration, User needs to click on Save Changes tab on below to save
the modify configurations.
Device Settings
Admin Password: on this page, user can change the default password if required.
User need to first input existing password and click on continue as below