User Guide

35 Congress Street, Salem, MA 01970
Tel# [phone] Fax# [phone]
e-mail:[e-mail]
Parts
SuperSnap™
Instruction Sheet
Instructions for assembly
Incept-9.18.02
The SuperSnap™ is a trademark of Rose Displays, Ltd. Neither the
manufacturer nor any sales agent may be held liable for injury, loss or
damage resulting from the use of these products.
Part #02INSSuperSnapBallChain
Finished Look
SuperSnap
12S300
End Caps
06-5475
Figure 2
Figure 5
Figure 1
Step 1
Snap the SuperSnap open and insert
poster (top and bottom). Fig. 1
Note: It is easier to open and close
the SuperSnap by starting at one
end and working your way down
the holder.
Step 2
To close, snap the SuperSnap shut.
Fig. 2
Step 3
Insert one end of ball chain into top
rail of the holder. Fig. 3
Note: It is easiest to slide the ball
into the holder if you hold the chain
as close to the ball as possible. Fig. 4
Step 4
Push end caps into place. Fig 5
Step 5
Suspend Poster.
Finished Look
Important note:
Please save and reuse the
SuperSnap, End Caps, and Ball
Chain for future projects.
Figure 4Figure 3
Ball Chain
96-0302P