Specifications

102
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
INTERNAL PAINTING WORKS
1.1 TECHNICAL SPECIFICATION OF MATERIALS
Materials shall be of the approved quality best obtainable. A list of materials of approved brand and manufacturer is indicated in the
annexure. Testing of materials of approved brand may have to be done at the decision of Architect & NLUO.
1. In case, some reason or other materials are required to be obtained from any manufacturer other than those listed, then prior
approval from Architects will be necessary supported by relevant test certificates qualifying the required standard. Further tests
as directed by the PMC shall also be carried out by the contractor at their own cost, if required.
2. Sample of all materials shall be got approved by NLUO/Architect before placing order & the approved sample shall be carefully
preserved in an appropriate manner at the site office for verification from time to time.
3. For standard bought out item, the size manufactured by the firms listed shall prevail when there is discrepancy in the size
mentioned in the schedule without any financial adjustment.
4. It shall be obligatory for the contractor to furnish certificate, from manufacturer or the material supplier, that the work has been
carried out by using their material and as per their recommendations.
5. No material will be supplied by NLUO only the site will be handed over to contractor for work.
6. The contractor will have his own store of their risk and cost. NLUO/PMC is not responsible to any missing, thief of the item of
the– contractor.
1.2PAINTING :
Approved paints, shall be brought to the site of work by the Contractor in their original containers in sealed condition. The
materials shall be brought in at a time in adequate quantities to suffice fro the whole work or at least a fortnight’s work.
The empties shall not be removed from the site of work, till the relevant item of work has been completed and
permission obtained from the PMC/NLUO.
Acrylic Emulsion Paint
Paint shall be of approved quality and shades Surface preparation, etc application shall be as per clause 1.4.