Specifications

123
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
Configuration and programming software tool for use with Emergency lighting control panel. Software is used to configure light
levels,set up lighting areas and create input and output parameters during set up and commissioning.
3.11WIRING:
Low voltage cables shall be aluminum conductor, PVC insulated, PVC sheathed and steel wire armored or steel tape
armored, FRLS- PVC out sheathed construction. The cables shall conform to IS 1554 Part I in all respects. Cables shall be laid in
tray/Hume pipe/in readymade trenches etc., as required.
The sizes of cables shall be selected to limit the voltage drop during running and voltage dip during starting to 5% and
10% respectively. Adequate derating factors shall be considered
RATING - The cable shall be rated for a voltage of 1100 Volts.
CORE IDENTIFICATIONS
Cores shall be provided with the following color scheme of PVC insulation:
1 core : Red/Black/Yellow/Blue
2 core : Red and Black
3 core : Red, Yellow and Blue
3 1/2 / 4 core : Red, Yellow, Blue & Black
Cable with all accessories for Looping.
2 X .8 sq mm Shielded & Screened Flexible Cable with all accessories for Looping
4 X 1.5 Sq mm Flexible cable with all accessories
3.12FM 200 FIRE SUPPRESSION SYSTEM:
The FM-200 flooding system is designed to conform to IES 15519, the National Fire Protection Association (NFPA) 2001 and
ISO/PF 20885 standards. The System comprises various components that come together to create an unbeatable suppression
system.
Agent Tank An essential component of the system, these high-pressure tanks are available in 4 container configurations,
namely 22, 34, 55, 70, 80, 100, 125 and 150 litres. Depending upon the requirement, single or multiple containers are installed.
All containers are available with a range of manifolds - creating a common outlet for the extinguishing agent to escape from
multiple cylinders.
Valves and Actuation Line The FM-200 system’s valves have a maximum working pressure of 150 bar valve seat 42mm.
Since it’s already integrated, no additional pneumatic actuator is required. Manual, pneumatic as well as electrical activations