Specifications

124
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
are available. Each valve comes with a pneumatic option and a master and slave.
Nozzles The extinguishing agent is dispersed through brass discharge nozzles. These nozzles are designed by the Design Cell
after surveying the area. From the size of the nozzle orifices, to the dispensing technique – single cut or cross cut – the nozzles
are created specially for your requirements. The nozzles are available in various sizes, from 20mm to 50mm.
Pipes and Fittings High-quality pipes harness atomization technology. This pressurizes the system, making it a part of the
detection mechanism as well as ensuring the extinguishing agent is discharged quickly to the nozzles through the network of
pipes.
Detection Devices Depending upon the requirements of the area being protected, the system integrates different types of
detectors, such as smoke detectors, heat detectors, linear heat detectors and aspirating detectors. In addition, an audible alarm
alerts personnel in the area to the danger.
The FM-200 Control Panel Designed and manufactured to the highest standards in a quality-controlled environment, the FM-
200 control panel offers outstanding value and performance. With three detection zones, the extinguishing agent’s release can
be activated from any combination of detection zones. The panel contains a large LED display to enable easy configuration
and control. The countdown timer is duplicated on up to seven remote status units to provide local indication of the FM-
200system’s status. With all the electronics mounted on a single, easily removable, steel plate, the panel is both robust and
easy to install.
4.D. FIRE EXTINGUIDHERS:
4.1ABC POWDER EXTINGUISHER – 6 Kgs:
6 Kg capacity Fire Extinguisher Mono Ammonium Phosphate Powder 90,stored pressure type, pressure gauge, gross weight 9.4
Kg., empty weight 3.4 Kg., can height 480MM,diameter 160 MM, discharge time minimum 13 secs, controllable discharge
mechanism, range minimum 4 meters, applicable on Class A,B,C and electrically started fire, A rating 4A,B rating 34B,Can
construction: Deep drawn and Carbon Di Oxide Mig welded, valve construction: Forging and Machining, Internal Coating of
Can: Epoxy Powder coating, External Coating of Can: Epoxy Polyster Powder coating ,External Coating of Can: Epoxy Polyster
Powder Coating, Sheet metal thickness : 1.60 MM, Helium Leak Detection Tested, ISI, CE approved, 5 Years Warranty.