Specifications

130
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
The jack modules shall be ETL verified to ANSI/TIA/EIA Category 6 and IEC/ISO 11801Class EA channel
performance. The jack modules shall be able to be re-terminated a minimum of 20 times and be available in 11
standard colors for color-coding purposes. All lots and individual jacks shall be serialized for future traceability. Tool
less termination.
10. Category 6 UTP Patch Cords
Patch Cords shall be constructed with Category 6, 23-AWG stranded cable. Patch Cords shall be factory terminated
with modular plugs featuring a one-piece, tangle-free latch design and black strain-relief boots to support easy moves,
adds and changes. Patch cords shall be wired to be compatible with both T568A and T568B wiring schemes. The
patch cords shall come in standard lengths of one to 10 Mtrs. The patch cords are available in eight standard colors of
White, Blue, Yellow, Green, Black, Red, Violet, and Orange.
The patch cords shall be ETL verified ANSI/TIA/EIA Category 6A and IEC/ISO 11801Class EA channel performance.
Each patch cord shall be 100% performance tested at the factory in a channel test to the ANSI/TIA/EIA and IEC/ISO
standards. All lots and individual patch cords shall be serialized for traceability.
11. Intelligent ready - Angular 24 port patch panel (unloaded)
The modular patch panel design shall accommodate copper RJ45 jack modules. The front of the panel shall include
multi-colored LEDs located above each port that indicate the connectivity status, as well as multi-functional push
buttons for diagnostic and configuration navigation. The panel shall offer a “common” method for labeling in
compliance with
TIA/EIA 606-A labeling standards. The modular patch panel shall be angular. Accommodates intelligent modules that
mount in the rear and utilize no additional rack space (zero RU)
12. Faceplates
Faceplates shall be 3 and 4 port , single gang faceplates with painted combination head screws. The faceplates shall
mount to industry standard square back boxes with screw to screw dimensions of 2.28" (60.4mm). Faceplates shall be
available with sloped design for improved bend radius control and dust protection. Each faceplate shall accept Jack
Modules that can be individually inserted and removed as required.
13. Specification Value
Flame Rating
Riser – NEC type CMR (UL) and FT4 rated
Plenum – NEC type CMP (UL) and FT4 rated
Installation Tension 25 lbs. (110N) maximum