Specifications

133
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
20. Fiber Adapter panels
Fibre adapter panels snap quickly into the front of fibre optic patch panels. Fibre adapter panels contain TIA/EIA-604 FOCIS
compliant duplex fibre optic adapters and exceed TIA/EIA-568-B.3 requirements. Loaded with three SC Duplex Multimode Fiber
Optic Adapters (Aqua) with zirconia ceramic split sleeves.
Gigabit layer-2 managed poe switch
20.1. The switch shall be a hardware based, reliable, purpose-built SNMP stackable managed switch with concurrent Power-
over-Ethernet (PoE) support on all 24 ports and shall support RPS from day one.
20.2. The switch shall support both 802.3af and 802.3at PoE standards as per site requirement on each switch port and shall have
a minimum PoE power bidget of 370 watts. The switch shall also support enhancement of the available PoE power
budget.
20.3
3
. The switch shall be IPv6 phase 2 certified and shall be a complete package inclusive of hardware, software and required
i
censes to meet the
m
inimum desired features from day-one.
20.4 The switch shall have at least 20 gigabit copper ports plus at least 4 Combo SFP ports in addition to 2 dedicated 20Gig bi-
directional stacking ports.
20.5 The switch shall offer wire speed non-blocking throughput of at least 88Gbps with packet forwarding of at least 65Mpps.
20.6 The switch shall support 16000 MAC address entries and a packet buffer of at least 2MB. The switch shall support at least
4000 VLANs.