Specifications

136
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
(A) CORE SWITCH
Sl.
No.
Description
1 Chassis based switch with minimum 12 payload slots and additional 2 management/supervisor slots.
2 Should have minimum 8 x 10G SFP+ ports.
3 Should have 24 x 1G UTP ports equally distributed across 2 payload modules. Should also have 24 x 1G SFP ports
equally distributed across 2 payload modules.
4 Should support minimum 64000 MAC address entries and minimum 2000 VLANs.
5 Should be populated with redundant supervisor/management engines.
6 Should have required accessories for rack mounting.
7 Should have fully populated redundant hot-swappable power supplies (N+N configuration) and redundant fans.
8 Should have minimum backplane/fabric capacity of 2Tbps, minimum switching capacity of 1Tbps, and minimum
packet forwarding rate of 744Mpps from day 1.
9 Should offer 80Gbps or higher bandwidth per each payload slot.
10 Should support UDLD or equivalent.
11 Should support dynamic routing protocols like OSPF and BGP from day 1.
12 Should support L2, L3 and L4 access control filters and should have complete IPv6 routing and management from
day 1
13 Should have non-stop switching and routing or equivalent feature from day 1.
14 Should support MSTP, per-port QoS, minimum eight hardware queues per port, SP queuing or equivalent, cross-
module link aggregation.
15 Should support management over GUI, CLI, RMON (minimum 4 groups), SNMP, andc sFlow/equivalent.
16 Should be capable of wire-speed policy enforcement for hardware-based, granular control of access and traffic to