Specifications

178
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
LIST OF MATERIALS OF APPROVED BRAND AND / OR MANUFACTURERS
SL.
NO
PRODUCTS BRAND GRADE TECHNICAL SPECIFICATION
1 PLYWOOD HIPPO/TRUWOOD/ GREEN
CLUB/CENTURY
ARCHITECT/TAJ
IS 710 Plywood should be phenol bonded with 11 layers of core veneer of
gurjan timber and two layers of face veneers with thickness of 0.5mm
confirming to IS 710.
2 FLUSH DOOR HIPPO/TRUWOOD/VISHAL
/CENTURY
IS 2202 Flush doors frames should be of pine timber without any joint and
filler should be of red miranti hardwood all seasoned and chemical
vacumm treated and core, face veneer bonded with phenol
formaldehyde confirming to IS 2202 part I
3 LAMINATES ROYAL TOUCH/
MERINO/SONEA/ASIS
IS 2046 Laminates should be of 1mm/1.25mm thick confirming IS 2046
4 PRE
LAMINATED
BOARD
ACTION TESA/
NOVANPAN/BHUTAN
BOARD/CROSS
BAND/ASIS
IS 12823 Particles should be of wood based and of uniform structure bonded
with urea formaldehyde.
5 BLOCK BOARD HIPPO/TRUWOOD/GREEN
CLUB/CENTURY
ARCHITECT/TAJ
IS 1659 Frames and all the filler should be of pine wood, seasoned and
chemically treated and the core veneer should be of gurjan timber and
bonded with phenol formaldehyde confirming to IS 1659
6 DECORATIVE
VEENER
TRUWOOD/GREEN/CENT
URY/ARIN
IS 1328 The decorative veneer on top surface should be min 0.6mm thickness
and uniformly sanded and the base ply should be of gurjan timber
and all face veneers bonded with phenol formaldehyde confirming to
IS 1328
7 ADHESIVES ROYAL BOAD AND
EQUIVALENT
IS 4835 Polyvenyle Acetate dispersion based adhesive.
8 GYPSUM
FALSE CEILING
USG-BORAL/SAINT
GOBIN
12.5mm thick Gypsum board
9 GRID CEILING ARMSTRONG/USG/EQUIV
ALENT