Specifications

NLUO PMC CONTRACTOR

SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL

The flush door shall confirm to Indian Standard Specification IS:2202(part-1).Flush door shall be obtained from the

manufacturer approved by the PMC and shall be ordered on the manufacturer to sizes as called for and shall be provided with

second class timber as per specifications edging, glued and nailed on all edges of the flush door as shown on Tendered

Drawings.

(v) Paneled door

The teak wood Paneled door shall be made of 35mm thick style top bottom and medium rail ,panel of 16mm thick plank

with necessary beading etc and surface shall be finished with melamine polish.

5.1 PLYWOOD:

Used mainly for the bodywork of furniture, shall be even or similar close grained plywood suitable for veneering, painting or

bonding laminate. It will be a phenol bonded, boil water resistant and powder proof ply confirming to IS:303.

6.0 PATCH FITTING DOOR:

Supplying and fixing of 12 mm thick approved make toughened glass with etching design fixed with help of patch fitting (spider

fitting) to hold the glass as per manufacturer specification all complete as per Tendered Drawing and direction of Engineer-in-

charge etc.

7.0 AUTOMATIC SLIDING DOOR:

Supply and fixing of automatic sliding door operator of compliant with European standards and produced according to the

guidelines for power-operated windows, doors and gates, BGR 232, the UVV and the VDE regulations. TÜV design tested, tested

according to the low voltage guidelines, fulfils DIN 18650 standards. The track profile should be separate from the main profile for

enabling reduction in vibration insulation. Which includes micro processor controlled drive unit, with self learning mechanism,

program selector with knob, motion detector (eagle 6 radars, 02 Nos), mechanical components, toothed belt, cover profile, ST-G

slimline profile suitable for glass thickness upto 10 mm, Safety Device-Light Barrier (01 Pair). Body finish : standard silver anodized