Specifications

NLUO PMC CONTRACTOR

SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL

15.0 FURNITURES :

15.1(a) LINEAR WORKSTATION (2580Wx660Dx1200mmH)

Providing & Fixing panel based partition of 60mm thickness 1200 mm height with framework made of aluminum alloy

extrusions. All Aluminium parts are pretreated and duly powder coated of 40-60micron thickness. All these frame work

sections are fitted to each other by fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway in

aluminum of size 118mm ht above / below the work top as per requirement for inlaying for Electrical management and carrying

the wire horizontally. Top & End Trims -The exposed vertical and horizontal faces of the frames are snap fitted with curve

trims. The trims are made of aluminum extrusions of size 60x19mm(thickness 1.5mm) and are covered with Die Casted End

caps on joints,2 way,3way & 4 Way caps. WIRE MANAGEMENT - Partition has concealed wire management capabilities and

are engineered for responsive and safe operations of power, telecommunications and data (LAN) and has separate components

for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements

Slots/cutouts are provided on Raceways to fix all electrical and data points. Work Table: Work Table top should be made of Pre

laminated particle board of 25 mm thickness Finish with One side Design Lamainte and bottom with White Balemcing. The

Straight edges will be sealed with matching 2mm thick PVC Edgebanding (Rehau). Zinc coated csmall Top support brackets

fixed to the partition frame support the tabletops . Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450Dx

680/710mmH, made of 18mm thick Prelamianted Particle Board . The drawer unit consists of 2 box drawer and 1 file

drawer. The two drawer box is fitted with roller bottom mounted Slide for free movement. and the Bottom filing drawer will

fitted with heavy duty Telescopic chanel .The unit is provided with central locking system, where in the three drawer are locked

with one key. D Type of handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors for

easy mobility. Key Board Trey: Plastic KBPT is made of ABS in Approved Colour & size as per avalability.CPU Trolley: Metal

Cpu trolley made in 1.00 mm thick CRCA Sheet with lockable caster . In Black fimish.

(b)LINEAR WORKSTATION (1290Wx660Dx1200mmH)

Providing & Fixing panel based partition of 60mm thickness 1200 mm height with framework made of aluminium alloy extrusions. All

Aluminium parts are pretreated and duly powder coated of 40-60micron thickness. All these frame work sections are fitted to each other by

fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway in aluminum of size 118mm ht above / below the

work top as per requirement for inlaying for Electrical management and carring the wire horizontally. Top & End Trims -The exposed vertical