Specifications

85
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
and horizontal faces of the frames are snap fitted with curve trims. The trims are made of aluminum extrusions of size 60x19mm(thickness
1.5mm) and are covered with Die Casted End caps on joints,2 way,3way & 4 Way caps. WIRE MANAGEMENT - Partition has concealed
wire management capabilities and are engineered for responsive and safe operations of power, telecommunications and data (LAN) and has
separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements.
Slots/cutouts are provided on Raceways to fix all electrical and data points. Work Table: Work Table top should be made of Pre laminated
particle board of 25 mm thickness Finish with One side Design Lamainte and bottom with White Balemcing. The Straight edges will be sealed
with matching 2mm thick PVC Edgebanding (Rehau). Zinc coated csmall Top support brackets fixed to the partition frame support the
tabletops . Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450Dx 680/710mmH, made of 18mm thick Prelamianted Particle
Board . The drawer unit consists of 2 box drawer and 1 file drawer. The two drawer box is fitted with roller bottom mounted Slide for free
movement. and the Bottom filing drawer will fitted with heavy duty Telescopic chanel .The unit is provided with central locking system, where
in the three drawer are locked with one key. D Type of handles are provided for easy opening and closing of drawer. The drawer unit is fitted
on castors for easy mobility.Key Board Trey: Plastic KBPT is made of ABS in Approved Colour & size as per avalability.CPU Trolley: Metal
Cpu trolley made in 1.00 mm thick CRCA Sheet with lockable caster . In Black fimish.
c. 120 Deg CUBICAL
Providing & Fixing desking based workstation of System - OPTIMA-1-Desking Base Workstation. 1050mm Height. Screen is made of 25mm
thick Desk Mount Screen made in aluminium frames with Soft Pin-Up Fabric. Worktop: Made of 25mm thick prelam particle board finished
with straignt edge band With Flip top with Brush. Worktop is supported on MS Powder Coated Metal Understructure with Triangular Section
(60x75) of thickness 1.8mm. Worktop Size: 1100Wx1100Wx 600 Dx25mmT - Lamianted Flip top of Size 450mm Width with
Brush.Electricals: Horizontal Power Management will under Flip top on Metal Cable tray ,where switch plate will be mount .and vertical
metal Riser for vertical wire trunkingWork Table: Work Table top should be made of Pre laminated particle board of 25 mm thickness Finish
with One side Design Lamainte and bottom with White Balemcing. The Straight edges will be sealed with matching 2mm thick PVC
Edgebanding (Rehau) Zinc coated csmall Top support brackets fixed to the partition frame support the tabletops . Pedestal Drawer Unit:- .The
Pedestal Unit of Dimensions 400W x 450Dx 680mmH, made of 18mm thick Prelamianted Particle Board . The drawer unit consists of 2 box
drawer and 1 file drawer. The two drawer box is fitted with roller bottom mounted Slide for free movement. and the Bottom filing drawer will
fitted with heavy duty Telescopic chanel .The unit is provided with central locking system, where in the three drawer are locked with one key.
D Type of handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors for easy mobility.Key Board Trey:
Plastic KBPT is made of ABS in Approved Colour & size as per avalability.CPU Trolley: Metal Cpu trolley made in 1.00 mm thick CRCA
Sheet with lockable caster . In Black fimish .
d. CURVILINEAR WORKSTATION (3160Wx1560x1200mmH)
Providing & Fixing panel based partition of 60mm thickness 1200 mm height with framework made of aluminium alloy extrusions. All
Aluminium parts are pretreated and duly powder coated of 40-60micron thickness. All these frame work sections are fitted to each other by
fasteners of 2mm thickness which is properly zinc coated for corrosion resistant. Raceway in aluminum of size 118mm ht above
/ below the
work top as per requirement for inlaying for Electrical management and carring the wire horizontaly.Top & End Trims -The exposed vertical