Specifications

86
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
and horizontal faces of the frames are snap fitted with curve trims. The trims are made of aluminum extrusions of size 60x19mm(thickness
1.5mm) and are covered with Die Casted End caps on joints,2 way,3way & 4 Way caps. WIRE MANAGEMENT - Partition has concealed
wire management capabilities and are engineered for responsive and safe operations of power, telecommunications and data (LAN) and has
separate components for electrical, data and telephone cables having adequate capability of both the vertical and horizontal wire movements.
Slots/cutouts are provided on Raceways to fix all electrical and data points. Work Table: Work Table top should be made of Pre laminated
particle board of 25 mm thickness Finish with One side Design Lamainte and bottom with White Balemcing. The Straight edges will be sealed
with matching 2mm thick PVC Edgebanding (Rehau). Zinc coated csmall Top support brackets fixed to the partition frame support the
tabletops . Pedestal Drawer Unit:- The Pedestal Unit of Dimensions 400W x 450Dx 680/710mmH, made of 18mm thick Prelamianted Particle
Board . The drawer unit consists of 2 box drawer and 1 file drawer. The two drawer box is fitted with roller bottom mounted Slide for free
movement. and the Bottom filing drawer will fitted with heavy duty Telescopic chanel .The unit is provided with central locking system, where
in the three drawer are locked with one key. D Type of handles are provided for easy opening and closing of drawer. The drawer unit is fitted
on castors for easy mobility.Key Board Trey: Plastic KBPT is made of ABS in Approved Colour & size as per avalability.CPU Trolley: Metal
Cpu trolley made in 1.00 mm thick CRCA Sheet with lockable caster . In Black fimish.
E. CONFERENCE/COUNSELING
TABLE SIZE ( 15600Wx2700Dx750mmH)
Providing & Fixing Conference table is to be supplied in completely knock down conditions for assembly at site. The construction of the main
table shall be free standing structure constructed with the help of minifix dowels and pins.The table should have waterfall edge of particle
Board shall be of Interior Grade as per IS 12406 : 2003 . The table connections have to be made in such a way that no gaps should be seen in
between.The Top & gable ends shall be constructed out of 25 mm thick full round Postformed particle board finish as per approved shade.
Modesty panel shall be made up of 18mm thick pre-laminated particle board finish. Prelam particle board with edge bended confirming to The
boards used should meet international standards of quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade
II.Should meet stringent norms of bending strength, screw-withdrawal strength and modulus of elasticity .The provision of Wire carrier shall
be as per manufacturer specifications. Table shall be assembled at site in following configuration . The Products should be tested as per
BIFMA standards. The Product should have ISO-9001:2000 and ISO 14001-2004 certifications.The boards used should meet international
standards of quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II.Should meet stringent norms of bending
strength, screw-withdrawal strength and modulus of elasticity .
F. MEETING TABLE ( 3600Wx1200Dx750mmH)
Providing & Fixing Conference table of size 3600mmX 1200mmX750mm The table is to be supplied in completely knock down conditions
for assembly at site. The construction of the main table shall be free standing structure constructed with the help of minifix dowels and pins.
The table should be made up of 43mmThick with combinaltion of 18mm Thick particle board finished with 2mm thick PVC Edgebanding &
25mm thick Moulded MDF Board with Decopainted .MDF Board shall be of Interior Grade as per IS 12406 : 2003. The table shall be
supported 36mm thick Prelamaintred gable ends and 18 mm thick modesty panel finish as per approved shade.The provision of Wire carrier