Specifications

NLUO PMC CONTRACTOR

SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL

fliptop box for electrical & data connections .Should have Alluminium profiles in front and work top with Alluminium edges. as per Tendered

Drawings & direction of Engineer in charge. The Products should be tested as per BIFMA standards. The Product should have ISO-9001:2000

and ISO 14001-2004 certifications.The boards used should meet international standards of quality and safety, as per EN 312, type P II, E2 and

Indian standards IS 3087, grade II.Should meet stringent norms of bending strength, screw-withdrawal strength and modulus of elasticity .

Q. V.C'S CHAIR :

Providing & Fixing of high back chair ergonomicaly designed for complete lumber support, die pressed and moulded wooden arm made of

teak wood and melamined,wooden five star base with metal insertion made of CRCA metal and wooden teak wood duly polished and

melamined base, with torsion bar mechanism. with superior Nylon-6/Ultramid -56 twin wheel castors having self lubricating properties for

friction free movement. grade III gas lift.Seat & back assembly which is made of 1.2mm rhick hot pressed die moulded plywood .The seat and

back are arrested together for motion on central pivot. with polyurethane foam with 45+/2 kg/m3 and hardness + 20+/2 on hampden machine

at 25% compression. cover fabric/leatherite tapestry, With locking arrangments.Seat depth 19" X 20" width,back height 26" X height 24.360

degree revolving should have class III pnumatic system for adjustment of height .Easily accesable lever for control .

R. V.C. VISITORS'SCHAIR :

Providing & Fixing of low back visitor chair ergonomicaly designed for complete lumber support, die pressed and moulded wooden arm

made of teak wood and melamined, with under structure made of CRCA metal pipe duly chrome plated .Structure made of 50mm X 25 mm

thick metal CRCA.Seat & back assembly which is made of 1.2mm rhick hot pressed die moulded plywood .The seat and back are arrested

together for motion on central pivot. with polyurethane foam with 45+/2 kg/m3 and hardness + 20+/2 on hampden machine at 25%

compression. cover fabric/leatherite tapestry, With locking arrangments.Seat depth 19" X 20" width,back height 26" X height 24.360 degree

revolving should have class III pnumatic system for adjustment of height .Easily accesable lever for control .

S. SOFA IN V.C'S CHAMBER :

Providing and placing sofa inner frame , basic structure made of wooden frame with leatherite upholstery and leg 10 mm stainless steel 304

grade size -L 1805 X D 990 X H 825 mm sofa size 3seater- 1805mm(L)X990mm(D)X825mm(H) , seat foam density=40kg/m3 back foam

density=32kg/m3

T. CABIN

TABLE (1650mm X 1650mmX 750mm) :

Providing & Fixing of table having with work top made of 25mm thick both side full round Postformed Particle Board . The main table shall

have understructure having25m mthick Full round Postformed Particle Board.and Modesty Panel made of 18mm Prelamainted finish board .

It should have 1 nos Mobile Pedestal unit having 2 drawer & 1 filing drawer.The Side storage unit od size 900Wx450Dx750mmHi made of

18mm thick Prelamianted Particle Board. with having Sliding Shutter. as per Tendered Drawings & direction of Engineer in charge.The

Products should be tested as per BIFMA standards. The Product should have ISO-9001:2000 and ISO 14001-2004 certifications.The boards

used should meet international standards of quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II.Should meet