Specifications

NLUO PMC CONTRACTOR

SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL

Providing & Fixing of free standing Low Height storage unit of Openable type of size 750mm H X 450 D made of 25mm thick TOP and rest

will be of 18 mm thick prelam particle board ,Side ,back & Shutter will 18mm thick Prelaminated particle board(PLPB) It Should have 2/3/4

openable door shutters storage unit with adjustable having load bearing capacity of shelf should be 35 Kg .These boards should meet

international standards of quality and safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II.Should meet stringent norms

of bending strength, screw-withdrawal strength and modulus of elasticity . All fittings are of HETTICK make.

Y . STAFF CHAIR

Providing & Fixing of GB-410 Medium back should have PP arms, chrome base, gas lift.fabic tapestry, with push back Mechanism. Chair

should be ergonomically designed for proper lumber support, PU arms with metal insertion, grade-III gas lift. Fabric tapestry, The seat and

back should be made up of 1.2 cm thick hot pressed moulded plywood & upholstered with leather/ fabric and with high density 45 moulded

polyurethane foam, The polyurethane foam is moulded with density =45+/-2kg./m3 and hardness = 20+/-2 on Hamded machine at 25%

Compress. The back form is Ergonomically designed with contoured lumbar support for extra comfort. The seat and back are arrested together

for motion on central pivot. The back of chair should have Polypropylene shell on seat and back as well. The chair should have tilt Mechanism

with locking mechanism. The Chair has die cast aluminum base with superior Nylon twin wheel castors having self lubricating properties for

friction free movement. Seat depth 19" X 20" width, back height 22" X width20.

Z. STAFF VISITOR'S CHAIR

Providing & Fixing of GB-411 Low back should have PP arms, chrome base, gas lift.fabic tapestry, with push back Mechanism. Chair

should be ergonomically designed for proper lumber support, PU arms with metal insertion, grade-III gas lift. Fabric tapestry, The seat and

back should be made up of 1.2 cm thick hot pressed moulded plywood & upholstered with leather/ fabric and with high density 45 moulded

polyurethane foam, The polyurethane foam is moulded with density =45+/-2kg./m3 and hardness = 20+/-2 on Hamded machine at 25%

Compress. The back form is Ergonomically designed with contoured lumbar support for extra comfort. The seat and back are arrested together

for motion on central pivot. The back of chair should have Polypropylene shell on seat and back as well. The chair should have tilt Mechanism

with locking mechanism. The Chair has die cast aluminum base with superior Nylon twin wheel castors having self lubricating properties for

friction free movement. Seat depth 19" X 20" width, back height 22" X width20.

A1.CENTER TABLE - 1 :(1200mm x 6000mm x460mm)

Providing and placing of 12 mmtampered glass top 6 mm tampered bottom glass for storage option Chrome plated understructure Passed 48

hours salt spray test Glass glass attached to the understructure via UV disc Load bearing capacity : 20 Kg of size 1200 W * 600 D * 460 H in

B1. CENTER TABLE - 2 :(600 mm dia)

Providing and placing of 12 mmtampered glass top 6 mm tampered bottom glass for storage option Chrome plated understructure Passed 48

hours salt spray test Glass glass attached to the understructure via UV disc Load bearing capacity : 20 Kg of size 600 mm dia * 460 H in mm