Specifications

93
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
C1. CENTER TABLE - 3 :( 1200 x 600 mm) ( FOR SOFA SET)
Providing and placing of Centre table should be made of Staineless steel frame confirming to Cr-Ni-Mn stainless with similar properties to
A240/SUS 202 stainless steel.pipe frame shoud be size 40mmx20x1.5mm The boards used should meet international standards of quality and
safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II.Should meet stringent norms of bending strength, screw-
withdrawal strength and modulus of elasticity . The over all size should be 4' length X 2' width.
D1. CENTER TABLE - 4 :( 600 x 600 mm) ( FOR SOFA SET)
Providing and placing of Centre table should be made of Staineless steel frame confirming to Cr-Ni-Mn stainless with similar properties to
A240/SUS 202 stainless steel.pipe frame shoud be size 40mmx20x1.5mm The boards used should meet international standards of quality and
safety, as per EN 312, type P II, E2 and Indian standards IS 3087, grade II.Should meet stringent norms of bending strength, screw-
withdrawal strength and modulus of elasticity . The over all size should be 4' length X 2' width.
E1. SOFA
Providing and placing sofa inner frame , basic structure made of wooden frame with leatherite upholstery and leg stainless steel 202 grade
pipe size Ø38mmx1.5mm thick and pvc shoe is used in the bottom of the frame. sofa size 2 seater- 1450mm(L)X760mm(D)X750mm(H) ,seat
foam density=40kg/m3 ,back foam density=32kg/m3
F1. MEETING ROOM MAIN CHAIR
Providing and placing of high back chair should have PP arms, chrome base, gas lift.fabic tapestry, with swivel tilt Mechanism. Chair
should be ergonomically designed for proper lumber support, Pp arms with metal insertion, grade-III gas lift. The seat and back should be
made up of 1.2 cm thick hot pressed moulded plywood & upholstered with leather/ fabric and with high density foam, The seat foam with
density =40+/-2kg./m3 and back 32kg/m3. The back form is Ergonomically designed with contoured lumbar support for extra comfort. The
chair should have swivel tilt Mechanism with locking mechanism. The Chair has matel base with superior Nylon twin wheel castors having
self lubricating properties for friction free movement. Seat depth 20" X 20" width, back height 30"
G1. MEETING ROOM VISITOR'S CHAIR
Providing and placing of medium back chair should have PP arms, chrome base, gas lift. leatherite tapestry, with swivel tilt Mechanism.
Chair should be ergonomically designed for proper lumber support, PU arms with metal insertion, grade-III gas lift. The seat and back should
be made up of 1.2 cm thick hot pressed moulded plywood & upholstered with leather/ fabric and with high density foam, The seat foam with
density =40+/-2kg./m3 and back 32kg/m3. The back form is Ergonomically designed with contoured lumbar support for extra comfort. . . The
chair should have swivel tilt Mechanism with locking mechanism. The Chair has matel base with superior Nylon twin wheel castors having
self lubricating properties for friction free movement. Seat depth 20" X 20" width, back height 23".