Specifications

95
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
arrangments.Seat depth 19.5" X 19.5" width,back height 28.5" 360 degree revolving should have class III pnumatic system for adjustment of
height .Easily accesable lever for control .
L1. FILE CABINET :
Supplying and fixing of file cabinets made of 19 mm Block Board top, vertical and shutter, and 6mm ply as back board necessary teak wood
beading with melamine polish all around. The exposed surface finished with 1mm laminate and inside finished with enamel paint, including
the cost of all materials,labour charges etc. complete and as per the direction of Engineer-in-charge. fixed with auto hinges,100 mm SS handle
and necessary locks including the cost of all materials,labour charges etc. complete.
M1. EXAMINATION OFFICE FRONT WAITING CHAIR (3 SEATER):
Supplying and fixing of S.S. Waiting area chair with facility for three seating ,the structure made of stainless steel 202 grade meeting
international standards to Cr-Ni-Mn stainless with similar properties to A240/SUS 302 stainless steel. The toughness of grade 202 at low
temperatures. Tensile strength 515 MPa 74694 psi, Elastic modulus 207 GPa 30000 ksi. Multiseater should have precast die moulded arms
with base frame of Stainless steel and vertical support duly powder coated and should have adjusters or levers..The seat and back should be
cushioned with hi-density foam with 40 density and upholstered with leatherette. Over all size should be 1860mmL X 760mmD X 790mm H.It
should have ergonomic design for comfort and should not topple.
16.0 BACK CREDENZA WITH BOOK SHELF:
Supplying and fixing of back credenza with book shelf made out of 19 mm block board vertically and horizontally. The exposed
surface finished with 4mm thick veneer. The size of bottom unit is 4800 x 450 mm and height up to 750 mm with 19 mm block
board shutter finished with 4mm veneer. The size of each top unit is 1350 x 350 and height up to 1650 from top level of
credenza and two no of same size top unit shall be fixed at the top of credenza on both sides. The shutter shall be made out of 19
mm block board with 4mm veneer and 6mm float glass fixed with teakwood beading. All exposed surface finished with
melamine polish, inside finished with chalk polish as specified in Tendered Drawing. The cost includes the SS auto hinges
handle, magnetic catch, lock etc as per Tendered Drawing including all materials, labours, T&P, taxes, royalties, transportation
etc. all complete as per the Tendered Drawing and direction of Engineer-in-charge.