Specifications

96
NLUO PMC CONTRACTOR
SIGNATURE AND SEAL SIGNATURE AND SEAL SIGNATURE AND SEAL
17.0 BACK CREDENZA (2400 x 450 x 750):
Supplying and fixing of Back credenza (2400 x 450 x 750)shall be made out of 19 mm B.W.R. block board and side of which is
to be finished with 1 mm thick approved shade laminate on exposed surface. Five openable shutter shall be provided using 19
mm block board finished with 1mm thick laminate on front side 4 partitions inside shall be provided which shall be made out of
19mm th. Block board and all unexposed block board surface shall be finished with chalk polish as per detail Tendered Drawing
etc all complete and as per direction of engineer in charge.
18. DINING TABLE:
Supplying and fixing of dining table with Plastic shell seat of approved make. The Coated. The table Top made of Stainless
Steel brushed finish with PLB insert for durability. Easy to maintain hygiene. Tubular frames made of 50.8 x 50.8mm x 1.2mm
thick powder ERW tubes at base which are welded and fixed to the Top with screws. Tubular stiffeners to be provided between
the two vertical frames The tubes to be closed with plastic caps. Seats must be in Plastic Shell Seats types. Level adjustors
should be provided to take care of unevenness in floor. The cost including of all materials, labours, T&P, taxes, royalties,
transportation etc. all complete as per the direction of Engineer-in-charge.
19.0 STORAGE CABINET:
Supplying and fixing of storage unit made out of 19 mm Block Board and 6mm ply back, necessary teak wood beading with
melamine polish all around. The exposed surface finished with 1mm laminate inside finished with enamel paint as specified in
Tendered Drawing. The cost includes all SS auto hinges,handles,locks etc.materials, labours, T&P, taxes, royalties,
transportation etc. all complete as per the Tendered Drawing and direction of Engineer-in-charge
Supplying and fixing of storage unit made out of 19 mm Block Board and 6mm ply back, necessary teak wood beading with
melamine polish all around. The exposed surface finished with 4mm veneer All exposed surface finished with melamine polish,
inside finished with chalk polish as specified in Tendered Drawing. The cost includes the SS auto hinges handle, magnetic