Instruction manual

14
Orion Installation and Operations Manual
Configure user
To configure the users of the Orion switch, select the option “User” in the “Configuration” menu by using the cursor
buttons and press enter. ⇒ The “User” mask will display full screen as shown in figure 9.
Figure 9. Configure User menu
In this menu, you can setup user names and privileges.
Field
Type
Description
Name
CHR16
User Name (case-sensitive)
Password
CHR16
User Password (case-sensitive)
HTP
Y/N
User may login and access via HTTP
FTP
Y/N
User may login and access via FTP
PPP
Y/N
User may login and access via ‚Internet’ (not available)
TEL
Y/N
User may login and access via Telnet
POW
Y/N
User is ‚Power-User’ and may activate e.g. the CrossPoint Mode
ADM
Y/N
User is Administrator and may change the configuration or
activate the CrossPoint Mode