Instruction manual

22
Orion Installation and Operations Manual
Status Display – Network
Network functionality is in development at this time.
Status Display – Firmware
Select Firmware from the status menu and press <Return>. The firmware status display will display showing
the firmware versions of the currently installed boards in the unit.
Use the page up and page down keys to view both screens.
Press ESC to return to the Status Menu.
Diagnostic LEDs (CATx cable / Fiber cable)
A- Diagnostic LED
(Link Status, Left socket)
B- Diagnostic LED
(Link Status, Right socket)
C- Diagnostic LED
(Link Status, Left socket)
D- Diagnostic LED
(Link Status, Right socket)
LED (CATx link)
Appearance
Diagnostics
Link Status (Green/Orange LED)
Green blinking
Link cable connection OK
Data transmission active
Green On
Link cable connection OK
No data transmission
Orange blinking
Port active, no link cable connection
Off
Port not active
LED (Fiber link)
Appearance
Diagnostics
Link Status (Green/Orange LED)
Green blinking
Port activated, signal OK
Green On
Port deactivated, signal OK
Red blinking
Port activated, no signal detected
Green On
Port activated, module error signal
Off
Port deactivated
A B
C D