Assembly Instructions

Page 1 of 2

Legs

Thank you for purchasing this quality product.Be sure to check all packaging material

carefully for small parts that may have come loose inside the carton during shipment.

COMPONENT LIST: HARDWARE LIST:

Flat Washer

Lock Washer

1 pce

Hex Bolt

Wrench

8 pcs

FIGURE

DESCRIPTION

QTY

Table Top

1 pce

4 pcs

Hardware Bag

1 pce

PART NO

FIGURE

DESCRIPTION

QTY

This product will take 15-20

minutes to assemble.

Reminders

1.Use only the hardware supplied.

2.Once the product is assemble,level and tighten all the bolts.

3.Do not over-tighten bolts.

4.This item may require periodic tightening

NOTE:

1.Two or two people are needed for assembly

2 please keep all hardware parts out of the reach of children.

MADE IN MALAYSIA

PAGE 1
Thank you for purchasing this quality product.Be sure to check all packaging material carefully for small parts that may have come loose inside the carton during shipment. COMPONENT LIST: FIGURE HARDWARE LIST: DESCRIPTION QTY Hardware Bag 1 pce 1 DESCRIPTION QTY Hex Bolt 8 pcs Lock Washer 8 pcs 3 Flat Washer 8 pcs 4 Wrench 2 Table Top Legs PART NO FIGURE 1 pce 4 pcs 1 pce This product will take 15-20 minutes to assemble. Reminders 1.Use only the hardware supplied. 2.
PAGE 2
ASSEMBLY : STEP 1 1.1-Turn table top upside down on a soft protective surface such as carpet. Insert table legs into table top using the provided hardware as shown on Fig1. Fig.1 Lock Washer Flat Washer Hex Bolt Wrench STEP 2 2.1- Turn table to uprigtht position. 2.2- Once table is fully balance fully tighten all bolts. Assembly is now Completed. Page 2 of 2 CARE INSTRUCTION ~ Be sure to use the same type of polish consistenly.