COMPONENTS PART FIGURE DESCRIPTION QTY | PART FIGURE DESCRIPTION aTy A & TOP PANEL 1PC G O FIXED SHELF PCS B D LEFT SIDE PANEL | 1PC H O ADJUSTABLE SHELF| 1PC C RIGHT SIDE PANEL| 1PC / UPPER BACK RAIL | 1PC D | PLASTIC BAR 1PC J g BACK RENAL PCS E MIDDLE PANEL 1PC K @ DOOR 1PC F & BOTTOM PANEL 1PC
HARDWARE & TOOLS PART FIGURE DESCRIPTION | QTY | PART FIGURE DESCRIPTION | @QTY 1 \ WOODEN DOWEL | 22PCS| 8 = KNOB BOLT | 1PG 8430 2 6@ CAM BOLT | 14PCS| 9 @ KNOB 1PC 3 Qfi CAM LOCK | PCS | 10 % ANCHOR PCS #15%12 4 % SHELF PIN | PCS | 11 M SOWER PCS D435 5 )" SCREW PCs TEMPLATE PAPER 312 6 "%m@ SCREW PCS 3%12 D=7 TOOL NEEDED: SUGGESTION: PHILIPS SCREWDRIVER REQUIRED i q = HOT INCLUDED TWO PEOPLE FOR ASSEMBLING WARNINGS: 1. BO NOTELET ANY BARR OBJECT TOUCH DR BUS THE SURFACE OF THE PRODUCT.
STEP 1: 1. Screw cam bolts (2} & insert dowels (1) to panels E& F. 2. Attach panel E to panel F and secure with cam locks (3). 3. Attach shelves G to panel E & secure with cam locks (3).
STEP 3: 1. Screw cam bolts (2} in panel A. 2. Insert dowels (1) to the top of panels and rail |. 3. Attach panel A to panels and secure with cam locks (3).
g 14 pCS ®aw1z =7 STEP 4: 1. Attach back panels J to the cabinet and secure the four corners with screws (6). 2. Insert plastic bar D between back panels J and finish securing the back panels with screws (6).
4 q 4 pos 5 @WMZ 4 PCS 8 = 1pC O ipG STEP 5: 1. Attach knob (9) to door K with bolt (8). 2. Attach door K to the cabinet with screws (5). 3. Insert shelf pins (4) to panels C & E and rest shelf H on the shelf pins.