Assembly Guide

PAGE 1 OF 2

INCLUDED TOOLS

5/32" HEX KEY

IMPORTANT!

DO NOT fully tighten the bolts until all

bolts are started. Once all bolts are inserted,

go back & tighten all the bolts.

Retain these instructions for future reference

HARDWARE

1) Step 1: Attach Leg Section 1 to Leg Section 2 with (2) "A" Bolts.

1/4-20 X 3"

1/4-20 X 2"

2) Step 2: Attach Leg Section 2 to Leg Section 3 with (2) "A" Bolts.

3) Step 3: Attach Leg Section 3 to Leg Section 4 with (2) "A" Bolts.

4) Step 4: Attach Leg Section 4 to Leg Section 1 with (2) "A" Bolts.

NOTE: All 4 Leg Sections are Identical and Numbered for Order of Assembly Only.

LEG SECTION 2

LEG SECTION 3

LEG SECTION 4

LEG SECTION 1

NOTE: DO NOT Tighten Bolts Until Table is Fully Assembled.

Round Table

Assembly Guide

PAGE 1
HARDWARE Round Table 1/4-20 X 3" LEG SECTION 3 Assembly Guide X8 A LEG SECTION 2 A B A A X4 1/4-20 X 2" X1 C A IMPORTANT! DO NOT fully tighten the bolts until all bolts are started. Once all bolts are inserted, go back & tighten all the bolts. A Retain these instructions for future reference A A INCLUDED TOOLS A 5/32" HEX KEY LEG SECTION 4 LEG SECTION 1 NOTE: All 4 Leg Sections are Identical and Numbered for Order of Assembly Only.
PAGE 2
Round Table Assembly Guide C LEG SECTIONS B B B B TABLE TOP 5) Step 5: Attach Leg Sections to Table Top with (4) "B" Bolts. 6) Step 6: Turn the Table Upright on a Flat Surface. 7) Step 7: Tighten all (4) "B" Bolts. 9) Step 9: Install Umbrella Grommet "C" in the Top of the Table. 8) Step 8: Tighten all (8) "A" Bolts.