Assembly Guide

PAGE 1 OF 2

INCLUDED TOOLS

5/32" HEX KEY

IMPORTANT!

DO NOT fully tighten the bolts until all

bolts are started. Once all bolts are inserted,

go back & tighten all the bolts.

Retain these instructions for future reference

HARDWARE

1) Insert (1) "A" Bolt into Lower Hole on Each Side to

Attach Seat to Back. Make Sure the Back is Fully Upright.

Make Bolts Snug, but Do Not Overtighten.

x10

1/4"-20 x 1-3/4"

SEAT

BACK

Dining Height Muskoka Chair

Assembly Guide

PAGE 1
HARDWARE Dining Height Muskoka Chair Assembly Guide BACK x10 A 1/4"-20 x 1-3/4" A IMPORTANT! DO NOT fully tighten the bolts until all bolts are started. Once all bolts are inserted, go back & tighten all the bolts. SEAT Retain these instructions for future reference INCLUDED TOOLS 5/32" HEX KEY A 1) Insert (1) "A" Bolt into Lower Hole on Each Side to Attach Seat to Back. Make Sure the Back is Fully Upright. Make Bolts Snug, but Do Not Overtighten.
PAGE 2
Dining Height Muskoka Chair Assembly Guide RIGHT LEG Note: Arm Goes on Top of Back Support 2) With the Chair Laying on its Left Side, Attach the Right Leg to the Seat using (3) "A" bolts. 3) Flip Chair and Lay on Right Side. Repeat for Left Leg. A BACK BACK SEAT LEFT ARM RIGHT ARM A A 4) Attach Arms to the Back Using (2) "A" Bolts. 5) Tighten all Bolts.