Installation Guide

Fleet Gate Installation Guide Roseman Engineering Ltd
4
The Fueling Division of Roseman Engineering Ltd.
1. Introduction
1.1 Purpose
This Vehicle Subsystem Installation Manual is provided to assist you in installing
the Offline Fleet Gate. Review this manual prior to the installation of the FG3 to
ensure proper installation practices. Incorrect installations are the major cause of
. system malfunctions
The FG3 must be installed as described in this manual to ensure the reliability and
proper operation of the system.
Please read this entire manual before starting your first installation.
1.2 System Overview
The Roseman FG3 is the integral component of the vehicle subsystem of the
Roseman FMS System. To properly install and utilize the FG3 the following is
required:
Roseman Fuel Management System Island Controllers
Pumps/dispensers modified using nozzle tags
WAF Receiver Upgrade Kit installed in the Island Controller
Failure to use a shielded cable as described in this manual will
void the warranty.
1.3 Components Overview
This section describes the various components that operate as part of the
Roseman System. Use this information to determine the equipment needed for
your particular fleet of vehicles.
Each Vehicle Unit includes the following components:
SVID (Small Vehicle Identification Device
Offline Fleet Gate - FG3
Fuel Inlet Antenna