Installation Guide

Fleet Gate Installation Guide Roseman Engineering Ltd
8
The Fueling Division of Roseman Engineering Ltd.

Do not use an electric drill or any other electrically-powered tools
within three feet of the filler neck or fuel tank, as this area is
considered a Class I, Group D hazardous location.
Do not use a heat gun or any other heating device within three feet
of the filler neck or fuel tank as this area is considered a Class I,
Group D hazardous location.
The Fuel Inlet Antenna and its wiring are intrinsically safe. You
must therefore ensure that there is complete separation between
the transmitter wiring and any existing auto wiring. You must also
avoid routing wires near the auto exhaust systems or fuel lines.
Mount the FG3 at least three running feet from the filler neck.
Figure 1: Typical Vehicle Wire Routing