Installation Manual

9
Figure 1 Typical Vehicle Wire Routing
Do not use an electric drill or any other electrically powered
tools within 3 feet of the filler neck or fuel tank, as this area is
considered a Class I, Group D hazardous location.
Do not use a heat gun or any other heating device within 3 feet
of the filler neck or fuel tank as this area is considered a Class
I, Group D hazardous location.
The Fuel Inlet Antenna and its wiring are intrinsically safe.
Ensure there is complete separation between the transmitter
wiring and any existing auto wiring. Also avoid routing wires
near the auto exhaust systems or fuel lines.
Mount the FJ3 at least 3 feet from the filler neck.
Water and/or moisture can seep in through the connectors
causing permanent damage!
FJ3