Quick Start Guide
Table Of Contents
- 1 About this guide
- 2 Confirm approval type
- 3 Mount the process seal antenna
- 4 Mount the lens antenna
- 5 Mount the ATAP lens antenna
- 6 Rotate the transmitter housing
- 7 Prepare the electrical connections
- 8 Connect wiring and power up
- 9 Configuration
5 Mount the ATAP lens antenna
5.1 Open air installations
The antenna extension must be fitted to the transmitter to comply with
open air requirements.
Figure 5-1: Antenna Extension
5.2 Mount the bracket
Prerequisites
Mount the bracket so that it is not susceptible to vibration.
Procedure
1. Mount the bracket to the pipe/wall.
Example
14 mm
Quick Start Guide September 2022
10 Emerson.com/Rosemount