Users Manual Part 1

3.4 Mount the process seal antenna

3.4.1 Mount the flanged version

Procedure

Lower the transmitter into the nozzle.

Note

Be careful not to scratch or otherwise damage the PTFE sealing.

2. Tighten the bolts and nuts (see Table 3-5).

Note

• Re-tighten after 24 hours and again after the first temperature cycle.

• Check at regular intervals and re-tighten if necessary.

3.4.2 Torque specifications

The conditions used for the calculation are:

Reference Manual Mechanical installation

00809-0100-4418

September 2022

Rosemount 3408 Level Transmitter 21