Users Manual Part 1

Table 6-3: Device Status Images in UIP

Device status image Category Description Action

Good No active alert. N/A

Failure At least one Failure alert is

active.

Click the device status image to

open a window with active alerts

together with recommended

actions.

Function Check At least one Function Check alert

is active (and no Failure alerts).

Out of

Specification

At least one Out of Specification

alert is active (and no Failure or

Function Check alerts).

Maintenance

Required

At least one Maintenance

Required alert is active (and no

Failure, Function Check, or Out

of Specification alerts).

6.5 Smart echo level test

The function allows you to test the behavior of the transmitter in a real tank environment

without raising the level. During the test, a virtual surface echo is superimposed onto the

radar signal, and the transmitter will output a level corresponding to the echo position.

The test verifies the integrity of the signal processing, and can be used to test the alarm

limits in the host system, output of the transmitter, and transmitter configuration (for

example the upper/lower range values).

6.5.1 Configure the smart echo level

Prerequisites

This test is available for transmitters with:

• Option code ET

• Rosemount Radar Master Plus

Procedure

Select Service Tools → Proof Test.

Reference Manual Operation and maintenance

00809-0100-4418

September 2022

Rosemount 3408 Level Transmitter 51