Users Manual Part 1

2. In the echo curve, click at the left end of the false echo suppression, and then
select Delete.
Figure 7-22: Delete False Echo Suppression
Suppress a false echo manually
The false echo may also be suppressed manually if the position of the false echo is known.
Prerequisites
It is recommended to suppress false echoes using Rosemount Radar Master Plus.
Procedure
1.
Select Service Tools → Echo Curve.
2. Select Options.
3. Select Suppress False Echo Manually. Suppressed echoes are shown in the table.
• To add a new suppression, select Add, and then type the distance to the false
echo and the width of the false echo area.
• To change a suppression, select the cell you want change and type the new
value.
• To delete a suppression, select the row you want to delete, and then select
Delete.
4.
Select Save.
5. Select Back.
Service and troubleshooting Reference Manual
September 2022
00809-0100-4418
98 Emerson.com/Rosemount