User's Manual

2-6
Edition 1. Ref. No: 307010E
Mechanical Installation
3 Carefully insert the transmitter
antenna adapter into the
sleeve and make sure that it
fits well into the cone antenna.
Secure the antenna adapter
with the union nut.
Secure the union nut with the
set screw.
4 Place the gasket on the tank
nozzle.
Carefully fit the transmitter
with flange and cone antenna
on the tank nozzle.
Tighten the screws and nuts.
Make sure that the O-ring and
the inside of the sleeve are
clean in order to avoid gas
leakage when using LoopRadar
in pressurized tanks.
!
Caution
Do not loosen union nut when
the tank is pressurized.
!
Warning
Gasket
Tank nozzle
Transmitter
Flange
Cone antenna
Transmitter
Union nut
Set screw
O-rings
Sleeve
Antenna
adapter