User's Manual

4-2
Edition 1. Ref. No: 307010E
Transmitter Setup
4.1 Configuration
4.1.1 General Settings
Output Parameter Measurement value to be shown on the Display and
Analog Output
Measurement Unit Measurement unit, meter or feet.
Antenna Type 4", 6" and 8" Cone are available.
Maximum level
LoopRadar Reference Point
Hold Off Distance H
Product Surface
Tank Height R
4.1.2 Basic Tank Geometry
Specify the following parameters:
Tank height R The distance from LoopRadar Reference Point to
the tank bottom. The LoopRadar Reference Point is
defined as the underside of the flange.
Hold Off Distance H The distance from the LoopRadar Reference Point
to the maximum product level.
See chapter 5 Using the Display Panel for information on how to use the Display
Panel for configuration of the Loopradar.