User's Guide
Table Of Contents
- Contents
- About this manual
- 1 Introduction
- The TankRadar Pro System
- Measurement Principle
- 2 Mechanical Installation
- Socket Requirements
- Free Space Requirements
- Dimensions
- Tools
- Mounting the Rod Antenna
- Mounting the Cone Antenna - PTFE sealing
- Mounting the Cone Antenna - Quartz Sealing
- Mounting the Cone Antenna - Process Seal
- Mounting the Parabolic Antenna
- 3 Electrical Installation
- Identication of Installed Options
- Junction Box
- External Connections
- Connecting to a TRL2 Bus Interface
- Connecting HART devices
- Connecting the Display Panel
- Cables
- Safety
- Power Supply
- Grounding
- System Overview
- Internal Connections
- 4 Pro Setup Software
- System Requirements
- Installing the Pro setup software
- Starting the Pro Setup Program
- Setting a Password
- Logging on to a password protected system.
- Setting measurement units
- Installing a Pro Transmitter
- Viewing Level Data
- Service
- 5 Using the Pro Display Panel
- Operation
- Viewing Level Data
- Installing a Pro Transmitter
- Service
- 6 Tank Distances
- Definitions
- Examples
- 7 Technical Information
- Technical Data
- Display Panel
- Analog Outputs
- 8 Troubleshooting
- Display Panel Error Messages
Saab TankRadar
®
Pro Pro Display Panel
5-23
Edition 2. Ref. No: 306010E
CNCL
1 0.56 m
2 8.45 m
3 14.20 m
4 15.37 m
5 32.00 m
EDIT
REG. FALSE ECHOES
3 Select the Remove echo option and click the
MARK
button.
4 Click the
SAVE
button to remove the selected echo.
Mark the Add new false option if you want to manually add a false
echo to the list of registered disturbing echoes.
Mark the Clear list option if you want to remove the whole list of
registered disturbing echoes. This option may be useful if you want
to create a completely new list.
See chapter 5 Pro Setup Software for further information on
disturbance echo handling. We recommend that the Pro Setup
software is used for configuration of tanks with several distur-
bance echoes.
To remove a registered disturbing echo, do the following:
1 Move the cursor to the echo you want to remove.
2 Click the
EDIT
button.