User's Guide
Table Of Contents
- Contents
- About this manual
- 1 Introduction
- The TankRadar Pro System
- Measurement Principle
- 2 Mechanical Installation
- Socket Requirements
- Free Space Requirements
- Dimensions
- Tools
- Mounting the Rod Antenna
- Mounting the Cone Antenna - PTFE sealing
- Mounting the Cone Antenna - Quartz Sealing
- Mounting the Cone Antenna - Process Seal
- Mounting the Parabolic Antenna
- 3 Electrical Installation
- Identication of Installed Options
- Junction Box
- External Connections
- Connecting to a TRL2 Bus Interface
- Connecting HART devices
- Connecting the Display Panel
- Cables
- Safety
- Power Supply
- Grounding
- System Overview
- Internal Connections
- 4 Pro Setup Software
- System Requirements
- Installing the Pro setup software
- Starting the Pro Setup Program
- Setting a Password
- Logging on to a password protected system.
- Setting measurement units
- Installing a Pro Transmitter
- Viewing Level Data
- Service
- 5 Using the Pro Display Panel
- Operation
- Viewing Level Data
- Installing a Pro Transmitter
- Service
- 6 Tank Distances
- Definitions
- Examples
- 7 Technical Information
- Technical Data
- Display Panel
- Analog Outputs
- 8 Troubleshooting
- Display Panel Error Messages
Saab TankRadar
®
Pro Pro Setup
4-1
Edition 2. Ref. No: 306010E
4 Pro Setup Software
The Pro Setup software is an easy to use PC program for con-
figuration of the Saab TankRadar Pro transmitter. It is designed
to run under Windows95/NT4.0. It also includes options for
viewing tank data as well as options for advanced service.
It is a simple task to start and configure the TankRadar Pro trans-
mitter. When the gauge is mounted on the tank flange, and the
cables are properly connected you only need to run through a
straightforward configuration procedure to start the transmitter.
In this procedure you will set a few parameters to optimize the
performance of the gauge for your particular application:
Tank dimensions
Type of application.
Analog out: source, range and alarm mode.
Volume calculations (optional).
Tank environment (for the disturbance echo handling).
PC
Modem
RTG 40